Tabla de contenido
Publicidad
Preventive Maintenance Checklist
The following is a general maintenance checklist which covers the major components of your conveyor.This will be helpful in
establishing a standard maintenance schedule.
COMPONENT
MOTOR
REDUCER
BELT
BEARINGS
(Pulleys & Rollers)
DRIVE CHAIN
SPROCKETS
V-BELTS
STRUCTURAL
NOTE: Check Set Screws after the first 24 Hours of
operation.
How to Order Replacement Parts
Included in this manual are parts drawings with complete
replacement parts lists. Minor fasteners, such as nuts and bolts,
are not included.
When ordering replacement parts:
1. . .
Contact Dealer from whom conveyor was purchased or
nearest HYTROL Distributor.
2. . .
Give Conveyor Model Number and Serial Number or
HYTROL Factory Order Number.
Give Part Number and complete description from Parts
3. . .
List.
4. . .
Give type of drive. Example—8" End Drive, 8" Center
Drive, etc.
5. . .
If you are in a breakdown situation, tell us.
24
SUGGESTED ACTION
Check Noise
Check Temperature
Check Mounting Bolts
Check Noise
Check Temperature
Check Oil Level
Check Tracking
Check Tension
Check Lacing
Check Noise
Check Mounting Bolts
Check Noise
Lubricate
Check for Wear
Check for Wear
Check Set Screws & Keys
Check Tension
Check for Wear
Check for Sheave Alignment
General Check:All loose bolts, e t c. , t i g h t e n e d
SCHEDULE
Weekly
Monthly Quarterly
HYTROL Serial Number
(Located near Drive on
Powered Models).
Publicidad
Tabla de contenido
