Horizon Global 24991 Instrucciones De Instalación página 11

5. Install hitch - apply silicone sealant to the hitch bracket mounting surfaces to prevent intrusion of water and exhaust fumes. See figure 4. Raise hitch
and bumper beam into position aligning holes with weldnuts in the end panel. Sandwich the hitch between the bumper beam and end panel.
6. Install fasteners – using a 13mm socket, install (8) M8 hex bolts,
7. Tighten all M8 CL8.8 fasteners with torque wrench to
20 Lb.-Ft. (27 N*M)
helical lock washers, and flat washers provided with hitch into
weldnuts in end panel, (4) per side.
Proper torque is needed to keep the hitch secure to the vehicle when towing.
©2019 Horizon Global™ Corp. Impreso en México Sheet 11 of 36 24991NP 9-19-19 Rev. A