Horizon Global 24991 Instrucciones De Instalación página 5

2b. Remove lower fascia - remove bottom half of wheel well trim,
using a 10mm socket, remove (1) screw from wheel well trim, and
using a flat head screwdriver, remove (1) push-pin rivet, both sides.
2d. Remove lower fascia - using a flat head screwdriver, remove (1)
push pin rivet from behind wheel well trim, both sides.
©2019 Horizon Global™ Corp - Printed in Mexico
2c. Remove lower fascia - using a plastic trim panel tool, carefully pry
(3) clips holding the wheel well trim. TIP: It may help to reach
behind fascia, by hand, release the clips by pressing center tab of
clips.
2e. Remove lower fascia - using plastic trim panel tools, starting at
outer edges near wheel well, while gently pulling rearward, release
clips and remove lower fascia.
Sheet 5 of 36 24991NP 9-19-19 Rev. A