Address Assignment Of The Valve Solenoid Coils - Festo CPA-GE-ASI-8E8A-Z Serie Manual Del Usuario

3.5 Address assignment of the valve solenoid coils

Addresses are assigned to the valve solenoid coils of both
slaves in ascending order without gaps, from left to right.
Depending on the manifold block, a valve location
occupies one address (CPA...-EV1) or two addresses
(CPA...-EV2). If a manifold block occupies 2 addresses, the
following applies:
– pilot solenoid 14 – lower-value address,
– pilot solenoid 12 – higher-value address.
Examples: Fitting equipment in the valve locations
4 double-solenoid valves
(manifold block EV2)
1 2
1 0 3 2 5 4
1
Output addresses of slave 1 (O0 ... O3)
2
Output addresses of slave 2 (O4 ... O7)
24
7 6
2 double-solenoid valves (EV2),
4 single-solenoid valves (EV1)
1
1 0 2 3 5
Festo CPA...-ASI-8E8A-Z 1108a English
2
4 6 7