First-Time Use - Zhermack DOUBLEMIX Manual De Usario

CATALYST
5KG
10KG
6
Figure

FIRST-TIME USE

6.6
7
Figure
BASE
8
Figure
10
9
Figure
110 of 188
Fig. 6: Screw the plug with rapid female coupling onto
the "CATALYST" can.
Grey
Fig. 7: Set the machine down on a flat work bench (see
section 6.3.1). Connect the main power cable (5) to the
mains power socket: follow the instructions in section
6.4 carefully.
m ix
l e
U B
D O
5
Fig. 8: Connect the container with the "BASE" product.
CATALYST
Connect the container with the "CATALYST" product.
Fig. 9: Make a hole on the bottom of the containers and
insert the supplied air venting filter (10).
10
Unscrew the vent cap from the 2 bayonets.
MAINTENANCE AND USE MANUAL
EN
DOUBLEMIX