How To Read And Use The Manual - Zhermack DOUBLEMIX Manual De Usario

MAINTENANCE AND USE MANUAL
This "User and Maintenance Manual" provides information concerning the installation, use and
maintenance of the doublemix mixer made by Zhermack.
• The machine must be used in accordance with the instructions in this manual: it is therefore
recommended that you read it carefully prior to installation and start-up. Make sure that you
read the entire manual and pay particular attention to messages written in bold type or items
highlighted by boxes and/or symbols: the symbols are designed to highlight situations involving
danger or requiring caution (see paragraph 1.2).
• Observance of standards and regulations shown in this manual will ensure that the machine is used
properly and that maintenance work is carried out safely.
• This User and Maintenance Manual is an integral part of the machine: it should therefore be kept
together with the machine so that it can be consulted as and when necessary (keep the booklet in a
secure dry place away from sunlight, atmospheric agents, etc.). It must be available for consultation
throughout the working life of the machine even when the machine is sold or finally dismantled.
• It is recommended that you keep this manual constantly updated by integrating any amendments,
additions or modifications made by the Manufacturer. Any notes or comments should be made on
the blank pages at the rear of the booklet (see Appendices: Notes).
• Use the manual properly so that it is not damaged in any way.
• Do not remove, tear or write on any part of the pages.
• If the manual is lost or damaged and its contents become illegible you can request a replacement
copy from the Manufacturer.
The purpose of this User and Maintenance Manual is to provide users with information on how to
operate the machine properly. The manual contains all the information needed to use the device as
intended: in particular the manual includes instructions and information on the following:
• correct installation of the machine;
• Detailed description of how the machine works and its components;
• Initial start-up;
• Scheduled maintenance;
• Basic Safety and Accident Prevention info.
This manual contains nine chapters each of which covers a specific argument. The appendices at the
rear of the manual are a useful complement to these chapters.
DOUBLEMIX
EN
CHAPTER 1: INTRODUCTION

HOW TO READ AND USE THE MANUAL

1.1
97 of 188