Routine Maintenance - Zhermack DOUBLEMIX Manual De Usario

CLEANING
8.1
The machine exterior can normally be kept clean just by wiping it with a dry cloth.
If necessary, wet the cloth just a little water or use a non-degreasing detergent.
The operator must ensure that the machine is kept clean and free from any foreign bodies such as
dirt, water, non-conducting liquids etc.
To this end it is necessary to carry out cleaning at the end of the work shift; cleaning must be done
with the machine in a stable position.
Before cleaning the machine exterior always turn the main switch to OFF. It is strictly
forbidden to clean the machine while it is connected to the mains power supply.
Never use inflammable, corrosive, alkaline or toxic liquids when cleaning the machine.

ROUTINE MAINTENANCE

8.2
Once the machine has been cleaned (see section 8.1) the operator must check for worn, damaged or
loose parts. If any such anomalies are discovered contact your Authorised Servicing Centre.
Should any of the above anomalies be discovered it is strictly forbidden to restart the
machine before such faults have been set right.
More precisely, should the operator note any defects or problems of any kind whatsoever he/
she must place a warning sign on the machine indicating that maintenance work is in progress
and that using the machine is forbidden (EC-compliant signs can be purchased from the relevant
suppliers).
Routine maintenance, cleaning and proper machine use are essential factors in guaranteeing long-
lasting machine performance and safety.
Machine safety devices/guards must never be removed except for repair and
maintenance purposes.
Such items must be replaced as soon as the situation which led to their removal no
longer exists and in any case before the machinee is used again.
116 of 188
CHAPTER 8: MAINTENANCE
MAINTENANCE AND USE MANUAL
EN
DOUBLEMIX