Residual Risk - Zhermack DOUBLEMIX Manual De Usario

MAINTENANCE AND USE MANUAL
Fig. 19: Wait for the silicone to harden in the flask and
switch off the machine.
REPLACE THE MIXING TIP BEFORE EVERY EXTRUSION.
DO NOT ACTIVATE THE MACHINE WITH A USED TIP OR WITH THE SAFETY PLUG.
IF THE APPLIANCE IS NOT USED FOR LONG PERIODS, REMOVE THE MATERIAL CANS.
Residual risk is:
• a danger that cannot be completely eliminated through design and application of safety devices.
• a potential danger which cannot be highlighted.
To prevent accidents always observe the instructions in this Manual. Should you
have any doubts at all please contact the Manufacturer or your Authorised Servicing
Centre.
DOUBLEMIX
EN
2
19
Figure

RESIDUAL RISK

115 of 188
7.4