Sauder 411614 Instrucciones De Montaje página 12

9
These holes must line up over
the LOWER SHELF (G) and
SMALL UPRIGHT (D).
 Carefully turn your unit over onto its front edges. Unfold the BACK (L) and lay it over your unit.
 Make equal margins along the edges of the BACK (L). Push on opposite corners of your unit if needed to make it "square".
 Fasten the BACK (L) to your unit using the NAILS (PP).
NOTE: Be sure to tap NAILS into the holes that line up over the SHELF (F), LOWER SHELF (G), and SMALL UPRIGHT (D).
NOTE: Perforations have been provided for access through the BACK. Carefully cut out the holes needed.
411614
These holes must line
up over the SHELF (F).
www.sauder.com/services
Caution
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Unfi nished
surface
L
NAIL
(45 used in this step)
PP