Publicidad
Idiomas disponibles
Idiomas disponibles
12
BLACK 9/16" LARGE HEAD SCREW
SILVER 5/8" MACHINE SCREW
(4 used for the PULLS)
(8 used for the HINGES)
LL
MM
FF
25 lbs.
25 lbs.
I
J
B
AA
5 lbs. each
(12 used)
C
M
70 lbs.
Z
A
25 lbs.
BB
40 lbs.
50 lbs.
Fasten a DOOR (M) to the LEFT END (B). Use four BLACK 9/16" LARGE HEAD SCREWS (MM).
NOTE: Be sure the STRIKE PLATE (FF) is at the top.
Fasten a PULL (BB) to the DOOR (M). Use two SILVER 5/8" MACHINE SCREWS (LL).
Repeat this step for the other DOOR.
To insert the KEYBOARD into your unit, tip the front of the KEYBOARD down and drop the rollers on the KEYBOARD
behind the rollers on the unit. Lift the front of the KEYBOARD up and slide it into the unit.
Push the RUBBER SLEEVES (Z) over the METAL PINS (AA). Insert the METAL PINS into the hole locations of your
choice in the ENDS (A and B) and LARGE UPRIGHT (C). Set the ADJUSTABLE SHELVES (I and J) onto the METAL PINS.
NOTE: Please read the next two pages for important warranty and safety information.
This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry.
www.sauder.com/services
411614
Publicidad
