Sauder 411614 Instrucciones De Montaje página 9

6
LARGE BROWN 1" FLAT HEAD SCREW
(7 used for the TOP)
 Before beginning this step, separate the LARGE BROWN 1" FLAT HEAD SCREWS (JJ) and SMALL BROWN 1" FLAT
HEAD SCREWS (KK). Do not confuse these SCREWS.
 Fasten the RIGHT END (A) to the SHELF (F) and RIGHT MOLDING (O). Tighten two TWIST-LOCK
in the SHELF. Use two BLACK 1-7/8" FLAT HEAD SCREWS (HH) through the outer holes in the MOLDING and into the
RIGHT END.
 Fasten the TOP (E) to the LARGE UPRIGHT (C) and MOLDINGS (N, O, and P). Tighten two TWIST-LOCK
FASTENERS in the LARGE UPRIGHT. Use seven LARGE BROWN 1" FLAT HEAD SCREWS (JJ) through the MOLDINGS
and into the TOP.
 Fasten two MAGNETIC CATCHES (EE) to the FRONT MOLDING (N). Use two BLACK 1-1/8" PAN HEAD SCREWS (II).
BLACK 1-1/8" PAN HEAD SCREW
(2 used for the MAGNETIC CATCHES)
II
JJ
F
Finished
edge
www.sauder.com/services
P
N
C
A
BLACK 1-7/8" FLAT HEAD SCREW
(2 used for the RIGHT END)
EE
Long
fi nished
edge
E
O
HH
®
FASTENERS
®
411614