Televes DTR-728701 Instrucciones De Uso página 48

User Manual
- Rename Channels:
This option enables you to change the name of a channel.
Select the channel to be renamed, using the PR+/PR- buttons, and
then press button 5. On the emerging keyboard, and using the
PR+/PR-/ -
/ +
the channel. Finally, locate the cursor on the "OK" option and press the
OK button on the remote control to confirm.
Press the EXIT button to return to the previous menu.
Find channels: If you want to view a channel and cannot remember its
position, you can carry out a search by name. To do this, press button 2.
On the emerging keyboard, begin to write the name of the channel. As
you write, you will start limiting the channel name options. When the
desired channel's name appears on the list, place the cursor on the
"OK" option of the keyboard and press the OK button.
On the resulting channel list select the channel you want, and finally
press OK to view it.
Sort channels: The channel list can be shown organized by different
criteria. These are: "by Default" (original configuration), "by Name (A-Z)",
"by Name (Z-A)", "FTA" and "Lock".
To do this, press button 3, and on the pop-up menu select one of the
organizing criteria using the PR+/PR- buttons, and press OK.
The list will be shown organized according to the selected criterion.
To leave the menu, press the EXIT button, and a confirmation message
will appear, where you should choose "YES" if you wish to keep the
changes or "NO" if you do not.
This option is only available in the "All Channel" group.
Move channels: If you wish to move a channel from its current position
on the general list, first select the channel on the list, and then press
button 4. The channel marked for moving will be identified with the
symbol .
Using the PR+/PR- buttons, move the channel to its new position on the
list, and press the OK button. A confirmation message will appear where
you should choose "YES" if you wish to keep the changes or "NO" if
you do not.
This option is only available in the "All Channel" group.
Note: If the LCN option is enabled, when you move a channel's position,
it will keep its number.
To leave the menu, press the EXIT button.
buttons, you will be able to choose a new name for
48
"DTR-728701"