User Manual
10.6.- Parental Lock
The 4-number password will never appear on the screen.
When selecting a menu option involving the use of a password (access to
blocked channels, channel list changes, etc.), the message "Input
Password" will appear on the screen letting you know that you should type
in your password.
In the event that the password entered is an incorrect one, you will not be
allowed access.
Menu Lock
If you wish to protect installation data and information, you should
enable this function by selecting the "On" option, using the -
buttons.
Channel Lock
If you wish to block child access to any channel, you should enable this
function by selecting the "On" option, using the -
The disponible options are: Off, Service ID, Age:4, ... , Age:18.
If this option is disabled, the channels that are marked as blocked on the
"channel list" of the "Channels" menu will remain open.
Changing your password
This option enables you to change the preset password.
Enter a new password, using the numerical (0 ... 9) keyboard on the
remote control.
Then confirm the new password by re-entering it.
As from this moment, you should always use the new password when
requested to do so.
Press the EXIT button to return to the previous menu.
Note: The factory-set default password is: 0 0 0 0
Once the password has been changed, keep it safe.
/
+
/
+
buttons.
56
"DTR-728701"