Festo CPV-GE-ASI-4E4A Serie Breve Descripción página 21

CPV..-GE-ASI-4E4A-...
1
2
3
4
1
2
Pin 2 = AS-Interface + (brown)
Pin 1 = AS-Interface - (light blue)
*) Only with CPV...-GE-ASI-4E4A-Z
Please note the following if branch lines are used:
–
Maximum total length of the AS-Interface bus: 100 m (without
repeater/extender).
–
The length of the load voltage cable depends on the current
consumption of the valve terminal and on fluctuations in the
load voltage.
–
An open-ended cable should be fitted with a Festo cable cap
type ASI-KK-FK or with a cable bushing type ASI-KT-FK. You
thereby avoid leakage currents and comply with protection
class IP65.
9910b
3
4
Pin 2 = + 24V *)
Pin 1 = 0 V *)
21