KTM 64112955044 Instrucciones De Instalación página 10

- Remove the cartridge.
- Clamp the cartridge vertically in the bench vise.
Clamping block T14015S
- Pull the spring downward and slide the special tool (open end
wrench T14032) onto the hexagonal part.
- Hold nut and remove screw cap .
- Remove special tool (open end wrench T14032).
- Remove spring with preload spacers and .
NOTE
The large 30 mm bushing is not reused.
- Unclamp the cartridge.
- Clamp the cartridge horizontally.
Clamping block T14015S
- Press in adapter and remove lock ring .
- Remove adapter .
- Twist off and remove the fl uid barrier .
10