Assembly; To Assemble The Guide Bar And Saw Chain (With Bar Knob) - Husqvarna 340i Manual Del Usuario

setting. Too large depth gauge setting increases the
risk of kickback.
• Make sure that the saw chain has the correct
tension. If the saw chain is not tight against the guide
bar, the saw chain can derail. An incorrect saw chain
tension increases wear on the guide bar, saw chain
and chain drive sprocket. Refer to
page 35 .
To assemble the guide bar and saw
chain (with bar knob)
WARNING: Always remove the battery
before you assemble or do maintenance on
the product.
1. Disengage the chain brake.
1155 - 002 - 13.05.2020
•
Accessories on

Assembly

2. Loosen the bar knob.
3. Remove the drive sprocket cover and the
Do maintenance on the cutting equipment regularly
and keep it correctly lubricated. If the saw chain is
not correctly lubricated, the risk of wear on the guide
bar, saw chain and chain drive sprocket increases.
transportation ring (A).
A
13