Symbols On The Product - Husqvarna 340i Manual Del Usuario

7. Power lever
8. Rear handle with right hand guard
9. Information and warning decal
10. Fan housing
11. Transportation cover
12. Chain oil tank
13. Power trigger lockout
14. Power trigger
15. Drive sprocket cover with bar knob
16. Chain tensioning wheel
17. Bar knob
18. Chain catcher
19. Spiked bumper
20. Bar tip sprocket
21. Saw chain
22. Guide bar
23. Indicator for state of charge
24. Warning indicator
25. Power cord
26. Battery charger
27. Combination wrench
28. Warning indicator
29. Button, battery status
30. Battery status
31. Battery release button
32. Battery
33. Operator's manual
34. Bar knob
35. Drive sprocket cover with bar bolt

Symbols on the product

Risk of serious injury or death to the
operator or others. Be careful and use the
product correctly. Read the operator's
manual carefully and understand the
instructions before operation of the product.
Use approved protective helmet, hearing
protection and eye protection.
Use 2 hands when you operate the product.
Do not operate the product with 1 hand only.
1155 - 002 - 13.05.2020
Do not let the guide bar tip touch an object.
Warning! Kickback can occur when the
guide bar tip touches an object. This causes
the guide bar to be thrown in the direction of
the operator. Risk of serious injury or death.
Rated voltage, V
Chain brake, engaged (right). Chain brake,
disengaged (left).
Chain oil.
Direct current.
Protected against splashing water.
Husqvarna HXX
Recommended cutting equipment in this
example: Bar length XX in (XX mm), max.
nose radius X Teeth, chain type Husqvarna
XX mm/XX
HXX.
+
-
Saw chain tension.
Measured maximum kickback value without
XX
triggering the brake, for the bar and chain
combination on the label.
yyyywwxxxxx
Note: Other symbols/decals on the product refer to
certification requirements for some markets.
Chain direction.
The rating plate shows se-
rial number. yyyy is the
production year, ww is the
production week.
3