Maintenance And Checks Of The Safety Devices On The Product; To Do A Check Of The Front Hand Guard; To Do A Check Of The Brake Trigger - Husqvarna 340i Manual Del Usuario

Ocultar thumbs Ver también para 340i:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Maintenance
Make sure that the cutter and cutter guard have no cracks and that they are not
damaged. Replace the cutter or cutter guard if they have cracks or if they have
been exposed to impact.
Make sure that the guide bar and saw chain have sufficient oil.
Do a check of the saw chain. Look for cracks and make sure that the saw chain
is not rigid or unusually worn. Replace if necessary.
Sharpen the saw chain. Do a check of its tension and condition. Do a check for
wear on the drive sprocket and replace is necessary.
Clean the air inlet on the product.
Make sure that the screws and nuts are tight.
Make sure that the keypad works correctly and that it is not damaged.
Use a file to remove burrs from the edges of the guide bar.
Do a check of the connections between the battery and the product. Do a check
of the connection between the battery and the battery charger.
Empty and clean the oil tank.
Blow through the product and battery cooling slots gently with compressed air.
Maintenance and checks of the safety
devices on the product

To do a check of the front hand guard

Regularly do a check of the front hand guard and the
inertia brake release.
1. Make sure that the front hand guard is not damaged
and that there are no defects, such as cracks.
2. Make sure that the front hand guard moves freely
and that it is attached safely to the product.
1155 - 002 - 13.05.2020
3. Put the product, with the motor off, on a stump or
other stable surface.
4. Hold the rear handle and let go of the front handle.
Let the product fall against the stump.
5. Make sure that the chain brake engages as the
guide bar hits the stump.

To do a check of the brake trigger

1. Put the product on stable ground and start it. See
Operation on page 14 .
WARNING: Make sure that the saw
chain does not touch the ground or other
objects.
Before
Weekly
Monthly
use
X
X
X
X
X
X
X
X
X
X
X
25

Publicidad

Tabla de contenido
loading

Tabla de contenido