Suzuki 57100-27831 Instrucciones De Instalación página 13

3. Pass the Grip Heater (R) D
lead wire to front of the handle-
bars.
4. Install the Grip Heater (R) D in
the order of removal.
• Apply thinly grease to the
handlebars.
• Apply grease to the end of the
throttle cables and cable pul-
ley.
 99000-25010:
SUZUKI SUPER GREASE
"A" or equivalent
• Connect throttle cables to the
throttle cable pulley of Grip
Heater (R) D.
• When installing the switch
assembly to the handlebars,
set the stopper peg of the
switch box to the hole on the
handlebars.
NOTE: Check that
housing is fitted securely
and throttle grip moves
smoothly after tightening
the screws.
5. Reinstall the existing balancer
and screw that was removed
step 1.
Stopper peg Stopper peg Stopper peg
the switch
GENUINE SUZUKI ACCESSORIES
Throttle cable No.1
Grip Heater (R)
Throttle cable No.2
Grip Heater (R) Grip Heater (R) Grip Heater (R)
13/20