Kohler K-1647 Guia De Instalacion página 5

Review Layout (cont.)
Identify the model number of your shower module in the illustration. If necessary, consult the
Homeowners Guide included with your shower module to verify the model number. If the
dimensions for your particular model are not shown, refer to the "Custom Shower Application"
illustration in the "Prepare the Site" section.
Determine the location of the control kit and steam head based on the roughing-in dimensions
illustrated. Dimensions given in the rough-in information are crucial for proper installation.
Install the Steam Control User Interface inside the steam enclosure.
Locate the control kit and steam head in the location indicated. All measurements are from the
inside of the module.
Custom Shower Applications
Install the Steam Control User Interface inside the steam enclosure.
The steam head should be located 6" (15.2 cm) above the shower floor or 4-1/2" (11.4 cm) above the
threshold.
Ensure clearance between the steam line and any surrounding surfaces.
Kohler Co. 5 1045320-2-G