Listening To The Usb Device - JVC KW-XG811 Manual De Instrucciones

Listening to the USB device

This unit can play MP3/WMA files stored in a USB device.
~
] Turn on the power.
All tracks will be played repeatedly until you change the source or detach the USB device.
If you have turned off the power (without
detaching the USB device)...
Pressing SRC turns on the power and
playback starts from where it has been stopped
previously.
• If a different USB device is currently attached,
playback starts from the beginning.
Stop playing and detaching the
USB device
Straightly pull it out from the unit.
"NO USB" appears. Press
another playback source.
You can operate the USB device in the same
way you operate the files on a disc.
(See page 8.)
Ÿ
SRC to listen to
USB memory
USB input terminal
Cautions:
• Avoid using the USB device if it might hinder
your safety driving.
• Do not pull out and attach the USB device
repeatedly while "READING" is shown on the
display.
• Do not start the car engine if a USB device is
connected.
• This unit may not be able to play the files
depending on the type of USB device.
• Operation and power supply may not work as
intended for some USB devices.
• You cannot connect a computer to the USB
input terminal of the unit.
• Make sure all important data has been backed
up to avoid losing the data.
• Do not leave a USB device in the car, expose
to direct sunlight, or high temperature to
avoid deformation or cause damages to the
device.
• Some USB devices may not work immediately
after attaching USB device or turn on the
power.
• For more details about USB operations, see
pages 15 and 16.
ENGLISH 9