Function Chart; Maintain; Maintenance; Hour Service Hotline - Vega VEGAWAVE S 61 Instrucción De Servicio

Sensor para la medición de nivel.
Ocultar thumbs Ver también para VEGAWAVE S 61:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

5.3 Function chart

The following chart provides an overview of the
switching conditions depending on the adjusted
mode and level.
Level
Mode max.
Overfill pro-
tection
Mode max.
Overfill pro-
tection
Mode min.
Dry run pro-
tection
Mode min.
Dry run pro-
tection
Failure of the
any
supply voltage
(min./max.
mode)
Failure
any

6 Maintain

6.1 Maintenance

When used as directed in normal condition,
VEGAWAVE S 61 is maintenance-free.

6.2 24 hour service hotline

However, should this measures not be successful,
call the VEGA service hotline in urgent cases under
the phone no. +49 1805 858550.
VEGAWAVE S 61
Switching
Control
status
lamp
Relay ener-
gized
or
transistor con-
ducts
Green
Relay deener-
gized
or
transistor
blocks
red
Relay ener-
gized
or
transistor con-
ducts
Green
Relay deener-
gized
or
transistor
blocks
red
Relay deener-
gized
or
transistor
blocks
Relay deener-
gized
or
transistor
blocks
flashes red
The hotline is available to you 7 days a week
round-the-clock. Since we offer this service world-
wide, the support is only available in the English
language. The service is free of charge, only the
standard telephone costs will be charged.

6.3 Instrument repair

If a repair is necessary, please proceed as follows:
You can download a return form (23 KB) in the
Internet from our homepage www.vega.com under:
"Downloads - Forms and Certificates - Repair
form".
By doing this you help us carry out the repair
quickly and without having to call for needed
information.
Print and fill out one form per instrument
l
Clean the instrument and pack it damage-proof
l
Attach the completed form and probably a
l
safety data sheet to the instrument
Please contact the agency serving you for the
l
address of the return shipment

7 Dismounting

7.1 Dismounting steps

Warning:
Before dismounting, be aware of dangerous
process conditions such as e.g. pressure in
the vessel, high temperatures, corrosive or
toxic products etc.

7.2 Disposal

The instrument consists of materials which can be
recycled by specialised recycling companies. We
use recyclable materials and have designed the
electronic modules to be easily separable.
WEEE directive 2002/96/EG
This instrument is not subject to the WEEE
directive 2002/96/EG and the respective national
laws (in Germany, e.g. ElektroG). Pass the instru-
ment directly on to a specialised recycling com-
pany and do not use the municipal collecting
points. These may be used only for privately used
products according to the WEEE directive.
Maintain
17

Publicidad

Tabla de contenido
loading

Tabla de contenido