Wall Tracks Installation - Jacuzzi SAVANNAH-GP Instrucciones De Asamblea

1. Level the tracks (B) and mark the track holes' positions. 4 holes for each track.
2. Remove tracks and drill pilot holes in the marked locations with a ø1/4"(6mm) drill bit.
3. Insert the wall anchors (FF) using a rubber mallet until the wall anchors are flush with the wall.
4. Replace and secure the 3 metal tracks (B) with screws (CC). Do not overtighten.
Helpful Hint
Make sure there
is a support stud
located behind the
drywall, behind the
tracks!
30 1/8"
1"
765mm
25mm

WALL TRACKS INSTALLATION

37 1/2"
953mm
6 3/4"
1 9/16"
172mm
40mm
Helpful Hint
Do not overtighten!
This may crack the
acrylic walls.
10
1
B
2
ø
1/4"
6mm
3
FF
4
CC