Sauder 401354 Manual De Instrucciones página 25

Step 20
Carefully stand your unit upright.
å
Before fastening the DOOR to your unit, be sure the
å
mounting screw is against the stops as shown in the right
diagram. If it isn't, loosen the mounting screw to slide it
against the stops. Then tighten the mounting screw.
Fasten the DOOR (P2) to the RIGHT UPRIGHT (E). Use the
å
SCREWS in the HINGES. See the next step for adjustments.
Peel the FELT DISC from the FELT DISC CARD (AAA). Stick
å
a FELT DISC on the DOOR where it comes in contact with
the LEFT UPRIGHT (F).
Fasten the BACKPLATE (WW) and KNOB (VV) to the
å
DOOR (P2). Use a BLACK 1-1/8" MACHINE SCREW (FFF).
See the next step for DOOR adjustments.
å
www.sauder.com/services
Mounting screw
E
F
FFF
BLACK 1-1/8" MACHINE SCREW
(1 used in this step)
401354
Pro Tip: Lift with your
legs. And, you know,
your arms.
stop
AAA
P2
VV
WW
AAA
Page 25