Siemens SINTRANS LR25 Guia De Inicio Rapido página 17

Handheld Programmer
(Ordered separately:
Part No. 7ML1930-1BK)
C
Accessing parameters via the handheld programmer
: SITRANS LR250 automatically returns to Measurement mode after a period of
Note
inactivity in PROGRAM mode (between 15 seconds and 10 minutes, depending on the menu
level).
Parameter menus
Note:
For the complete list of parameters with instructions, see the full LR250 FF Operating
Instructions manual.
Parameters are identified by name and organized
into function groups. For the complete list of
parameters with instructions, see the full LR250 FF
Operating Instructions manual.
Page EN-16 SITRANS LR250 (FF) – QUICK START MANUAL
Key Function
Updates internal
enclosure temper-
ature reading.
Updates echo
confidence value.
Updates distance
measurement.
Mode opens
PROGRAM mode–
Right ARROW
opens PROGRAM
mode–
Up or Down
ARROW
toggles between
AIFB 1 and AIFB 2.
Result
New value is displayed in LCD
secondary region.
Opens the menu level last dis-
played in this power cycle, unless
power has been cycled since exit-
ing PROGRAM mode or more than
10 minutes have elapsed since
PROGRAM mode was used. Then
top level menu will be displayed.
Opens the top level menu.
Identifies which AIFB is the
source of the displayed value.
1. QUICK START
2. SETUP
2.1. IDENTIFICATION
2.2. DEVICE
..................
2.4. LINEARIZATION
2.4.1. VOLUME
2.4.1.1.VESSEL SHAPE
7ML19985XN82