GENDEX Oralix AC Manual De Servicio página 21

ORALIX AC SYSTEM
It is a task of the installation engineer to choose the proper fixing hardware in relation with
the type of mounting wall available. Failure to do so could cause the X-ray system to come
loose and fall, causing possible injury to the patient or operator.
4
Install and tighten all screws with lock wash-
ers (see page B-2, Wall mounting methods).
Ensure that Timer will be aligned with Wall
Support.
Connect line cable on terminal block X3 of the
5
Timer (see also BZ-4, System electrical connec-
tions).
Tighten all bolts with lock washers. Apply on fix-
6
ing bolts a torque of 10 Nm.
Ensure that Wall Support is perfectly aligned in
vertical position.
Gendex Dental Systems
NOTE
NOTE
Printed on: 22 Mär 2012, 09:28:10 am; Printed by: TOBIAS BAUER
WARNING
INSTALLATION
B-7