Best CPD Serie Instrucciones De Instalación página 10

17. OPERATION
Always turn your hood liner on before you begin cooking to establish an air flow in the kitchen. Let the blower run for a few
minutes to clear the air after you turn off the range. This will help keep the whole kitchen cleaner and brighter.
COOKTOP LIGHTING (HALOGEN)
The halogen lighting is controlled by the dial.
• P 1: O
OSITION FF
• P 2: L
OSITION OW
• P 3: H
OSITION IGH
• P 4: O
OSITION FF
•
Use 120 V, 50 W, MR16 with GU10 base or PAR16 with GU10 base, shielded halogen lamps (included).
BLOWER
The blower is controlled by the dial.
• P 1: O
OSITION FF
• P 2: L
OSITION OW
• P 3: M
OSITION EDIUM
• P 4: H
OSITION IGH
• H S ™
EAT ENTRY
This hood liner is equipped with a Heat Sentry™ thermostat. This thermostat is a device that will start or speed up the
blower if it senses excessive heat above the cooking surface.
1) If blower is OFF - it turns blower ON to HIGH speed.
2) If blower is ON at a lower speed setting – it turns the blower up to HIGH speed.
When the temperature level drops to normal, the blower will return to its original setting.
The HEAT SENTRY can start the blower during a range top fire or other excessive heat situations even if
the hood is turned off. In this case, it is impossible to turn the blower OFF with blower switch. If you must
stop the blower, do it from the main electrical panel.
WARNING
!
VQ0010
- 10 -