Best CPD Serie Instrucciones De Instalación página 6

5. REMOVE BAFFLE FILTERS
Remove tape on filters. Remove filters
from power pack and set aside. It is
recommended to start with the center
filters.
6. REMOVE GREASE DRIP RAIL
A. Lift grease drip rail to disengage it
from the bottom panel.
(Blower shown is for reference only
and does not represent actual
blower in this product.)
7. REMOVE THE BOTTOM PANEL
Using a Phillips screwdriver, remove both bottom filter filler
panels.
R
ETAINING
B
OTTOM VIEW
8. REMOVE THE KNOCK-OUT OPENING
From inside the hood liner, remove the wiring cover and set aside. Punch out the
electrical knockout hole on top of the hood. Install the wire clamp (included in parts bag).
1
HD0291
S L
CREW OCATIONS
A
Disassemble bottom panel, lift up and out, and set aside.
R
- 6 -
2
S L
ETAINING CREW OCATIONS
B
OTTOM VIEW
HR0027