General Safety Measures; General Safety Rules - Astralpool 06862 Manual De Instalación Y Mantenimiento

IMPORTANT
This manual contains essential information on the safety measures that should be followed when installing and starting up
the pump. It is therefore vital that both the fitter and user read these instructions before fitting and operating the unit.

1. GENERAL SAFETY MEASURES

These symbols (
safety measures.
DANGER. Risk of electrocution.
There is a risk of electrocution if this safety measure is not heeded.
DANGER.
There is a risk to people or objects if this safety measure is not heeded.
WARNING.
There is a risk to damage to the pump or installation if this safety measure is not heeded.

2. GENERAL SAFETY RULES

GENERAL FEATURES
• The machines named in this manual are specially designed for the recirculation of clean air and at a maximum
temperature of 40ºC.
• Installation should be done in accordance with the particular features of each situation.
• Current accident prevention standards should be followed.
• Any modification that is to be made to the pump requires prior authorisation from the manufacturer. Original parts and
accessories authorised by the manufacturer guarantee greater safety. The pump manufacturer is absolved of any
responsibility for damage caused by unauthorised parts or accessories.
• During operation, the electrical parts of the pump are under power. Work on each machine or on units linked to it can
only be done after connecting them to the electricity supply and after disconnecting the starters.
• The user should ensure that assembly and maintenance work are done by qualified and authorised persons who have
previously read the installation and service instructions carefully.
• Safety during the operation of the machine is only guaranteed with compliance with and regard for that set out in the
installation and service instructions.
• The limit values that appear in the control box should not be exceeded in any way.
• In the event of defective functioning or breakdown, contact your supplier or nearest representative.
PRECAUTIONS DURING INSTALLATION AND ASSEMBLY WORK
• During the connection of the electrical cables to the machine motor, the layout inside the connections box should be
checked, ensuring that there are no pieces of cable left behind on the inside after closing and that the earth connection is
correctly connected.
• The electrical installation of the pump should have a differential protector with a value no greater than 30 mA.
Installation and Maintenance Manual
) indicate the possibility of danger as a consequence of not heeding the corresponding
- BLOWED PUMP 3