Kit Assembly - Metra 99-8234 Instrucciones De Instalación

DIN head unit provision with pocket
1. Slide the mounting brackets onto
the sides of the radio housing
until the side clips engage. Note:
Tabs are marked Left and Right.
(Figure A)
2. Slide the DIN cage into the radio
housing and secure by bending the
metal locking tabs down.
(Figure B)
3. Slide the aftermarket head unit into
the cage and secure. (Figure C)
4. Snap the trim plate into the
radio housing. (Figure C)
5. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
6. Reassemble dash in reverse order
of disassembly.

Kit Assembly

(Figure A)
(Figure B)
(Figure C)
99-8234
ISO DIN head unit provision with pocket
1. Slide the mounting brackets onto
the sides of the radio housing
until the side clips engage. Note:
Tabs are marked Left and Right.
(Figure A)
2. Mount the ISO brackets to the head
unit with the screws supplied with
the unit. (Figure B)
3. Slide the head unit into the radio
opening until the side clips engage.
(Figure C)
4. Snap the trim plate into the
radio housing. (Figure C)
5. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
6. Reassemble dash in reverse order
of disassembly.
3
(Figure A)
(Figure B)
(Figure C)