Mechanical Installation - Akron Brass Navigator Pro Instrucciones De Instalación, Funcionamiento Y Mantenimiento

Motor Connector (mates with Deutsch Connector DT06-2S and W2S)
PIN
1 Motor A
2 Motor B
Flow Connector – LEAVE PLUGGED – Flow sensor not available with Style 9323
Pressure Connector - LEAVE PLUGGED – Flow sensor not available with Style 9323
Display Connector (mates with Deutsch Connector DT06-6S & W6S)
PIN
1 CAN HI
2 Shield
3 Ground
4 Battery + Voltage
5 CAFS out (Solenoid connection)
6 CAN LO

5.2 MECHANICAL INSTALLATION

The 9323 valve controller display is attached to the panel using 4, 10-24 socket-head, cap-screws . An installation torque of 6-8 in-lbs should be applied
when installing the valve controller display to prevent damage to the enclosure .
Truck Panel Cutout:
1-3/4"
1-5/64"
1-3/4"
3-1/2"
Page 06
Ø 2-3/8"
#10-24 BOLTS
4x