1. PRELIMINARY AND SAFETY
For your own safety as well as that of the apparatus you are recommended to
follow the procedures described in this instruction manual and carefully read
all the notes preceded by the symbol
and/or Instructions may damage the apparatus and/or its components or injure
the operator.
1.1.
PRELIMINARY INSTRUCTION
• Read this instruction manual and the instrument's one before starting use.
• Any instruction preceded by the caution symbol must be observed in order to avoid
accidents or damages.
• Check that battery has been correctly placed.
• Only qualified personnel practicing applicable safety precautions must use this product.
• Do not effect any measurement under conditions beyond the limits specified in this
manual.
Connect the tester only to inactive cables. Connection to active telephone
lines and networks may damage the instrument.
1.2.
DURING USE
Read carefully the following recommendations and instructions:
If the display shows the symbol "
Never replace batteries while the instrument is connected to conductors.
• Do not use the instrument if damaged.
• Do not use the instrument outdoor.
• Do not use the instrument at altitudes exceeding 2000 meters.
• Do not perform measurements under environmental conditions beyond the limits
specified in paragraph 6.3.1.
• Do not expose the instrument to water splashes.
1.3.
AFTER USE
• After using the instrument switch it off.
• Remove batteries if you expect not to use the instrument again for a long period.
1.4.
END OF LIFE
CAUTION: this symbol indicates that equipment and its accessories shall be
subject to a separate collection and correct disposal.
CAUTION
. No compliance with the CAUTIONS
CAUTION
CAUTION
" interrupt testing and replace batteries.
EN - 2
QuickLAN 6055