Securing The Side Smoker To The Grill Barrel; Installing The Cooking Components - Pit Boss PB0600SS Manual Del Propietário

Ocultar thumbs Ver también para PB0600SS:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14
FOR PB850PS2 / PB1150PS2 GRILLS
Install two screws (F) on the side of the Main Barrel
and tighten only half way. Hook up the Main Cabinet
on the screws first, then secure the screws in place.
Note illustration 6B.
FOR PB1600PS1 GRILLS
Mount Fixed Support C onto the exterior side of the
Main Barrel using two screws, washers and locking
washers. Note illustration 6C.
Hook up the Main Cabinet onto Fixed Support C. The
bracket of Fixed Support B will match up onto Fixed
Support C. Note illustration 6D.
From below, use two screws (A) to secure the Main
Cabinet to Fixed Support C. Note illustration 6E.
8
6B
F
6C
6D
6E
A
A
7. SECURING THE SIDE SMOKER
TO THE GRILL BARREL
Parts Required:
2
x
Washer (#B)
2
x
Locking washer (#C)
2
x
Screw (#D)
Installation:
From inside, secure the Main Cabinet to the side panel
of the Main barrel using two screws, washers, and
locking washers.

8. INSTALLING THE COOKING COMPONENTS

Parts Required:
6
x
Cooking Grid Support Brackets (#9)
3
x
Cooking Grid (#8)
Installation:
Insert three Cooking Grid Support Brackets into the
holes along the left side wall of the interior Main
Cabinet. Once positioned in the holes, tilt downward
to secure into position. Note illustration 8A.
Repeat the same process, matching the same heights,
for the right side wall.
Last, place the Cooking Grids one-by-one, on the
Grid Support Brackets inside the Main Cabinet. Note
illustration 8B.
The unit is now completely assembled.
7
8A
9
8B
8
9

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

100831061210789

Tabla de contenido