Installation To Double Wood Stud Wall - PEERLESS PARAMOUNT PRTLU Guia De Instalacion

Installation to Double Wood Stud Wall

1
Use wall plate (A) as a template, make sure it is level, and mark four mounting holes along the center
lines of the wood studs. Drill four 5/32" (4 mm) dia. holes 2.5" (64 mm) deep. Level wall plate (A) and
attach to wall with four wood screws (D) into stud center. Use of an edge to edge stud finder is highly
recommended. Tighten screws firmly, but do not overtighten.
D
WARNING
Do not over tighten screws, or
damage may occur.
A
3 of 32
WARNING
D
A
TOP CUTAWAY VIEW
ISSUED: 11-03-09 SHEET #: 202-9395-1
Wood screws must
center in stud.
STUD