Installation To Double Wood Stud Wall - PEERLESS SmartMount SA770PU Instalación Y Ensamblaje

Installation to Double Wood Stud Wall

• Installer must verify that the supporting surface will safely support the combined load of the equipment and all attached
hardware and components.
• Tighten wood screws so that wall plate is firmly attached, but do not overtighten. Overtightening can damage the
screws, greatly reducing their holding power.
• Never tighten in excess of 80 in. • lb (9 N.M.).
• Make sure that mounting screws are anchored into the center of the stud. The use of an "edge to edge" stud finder is
highly recommended.
• Hardware provided is for attachment of mount through standard thickness drywall or plaster into wood studs. Installers
are responsible to provide hardware for other types of mounting situations.
Determine and mark with a pencil, the desired center of screen on wall. Measure 7" (177 mm) above desired center
2
of screen and draw a horizontal line to locate placement of wall plate template. Wall plate (D) can be mounted to two
studs that are 16" apart. Use a stud finder to locate the edges of the studs. Use of an edge to edge stud finder is
highly recommended. Based on their edges, draw a vertical line down each stud's center. Align top of template (top
of wall plate) with horizontal line and align slots of wall plate template with wood stud center lines. Level template
(wallplate) on wall and mark center of six mounting holes making sure that mounting holes are on the stud
centerlines. Drill six 3/16" (5mm) dia. pilot holes 3" (76 mm) deep. Level and secure wall plate (D) on wall using six
5/16" x 3" wood screws (R) as shown in fig. 2.2.
NOTE: Wall plate (slot) may be adjusted .875" in either direction off center of wood screw (R) and stud as shown in
detail 1.
Skip to step 3.
STUD
CS
CS = center of screen
DETAIL 1
Visit Peerless website at www.peerlessmounts.com
7"
(177 mm)
D
fig. 2.1
.875"
STUD
WARNING
6 of 45
R
ISSUED: 05-16-08 SHEET #: 095-9285-1
For customer care call 1-800-729-0307 or 708-865-8870
D
fig. 2.2