Publicidad
ASSEMBLY INSTRUCTIONS
Phillips Screwdriver, Hammer, Tape Measure, Wood Glue, 1/2" or Adjustable Wrench.
NOTE: Due to the fact that more than one type of hardwood is used, we recommend
To test for desired color on: a) Veneer parts – apply stain to unexposed area inside of any apron.
R
FIG. 1
READ CAM-LOCK INSTRUCTIONS
1) Insert 3/4" Cam Connectors (R):
six in Top (A)
six in Bottom (BB)
four in each Facing (J&K)
FIG. 2
2) Attach Top (A) and Bottom (BB) to Side Panels (C) using the 3/4" Cam Housings (S). The holes in
narrow edge of each side panel must face the same direction.
FIG. 3
3) The Facings are stamped "Left" and "Right" on the bottom edge. Glue the Sleepers (I) with the notch
to the outside to the dowels in the Left and Right Facings (J & K). Secure in place with a #8 x 1¾"
Pan Head Screw (ZA) into the predrilled holes in each notch.
PAGE 4 — 276W
276W Tuscan Pantry
TOOLS REQUIRED:
IMPORTANT:
testing for desired color.
b) Alder pieces – apply stain to back of side facing.
R
A
R
BB
S
C
A
S
ZA
ZA
I
K
R
R
ZK
ZK
K
J
Glue two 3/8" x 1½" Wood Dowels (ZK) into
each Facing (J & K).
S
C
S
J
I
ZA
ZA
R
ZK
ZK
BB
Publicidad
