Publicidad
M
L
W
FIG. 7A
7) With the unit standing upside down, lay out Side Aprons (L), Front Apron (M), and Back Apron (NN)
so that the dowels fit in the holes in the Bottom (BB). The pocket drilled holes must be toward the
inside. Use #8x1" Pan Head Screws (W) to fasten aprons to bottom.
Insert a Leg Brace (ZG) in the grooves of each pair of adjacent aprons flush with bottom edge of
aprons. Fasten in place with two #5x5/8" Flat Head Screw (ZH) in each apron.
T
U
FIG. 8B
8) Screw the T-Nuts (U) on the Adjustable Glides (T) and tap them into the holes in the bottom of the
Front Legs (G). Do not try to pull the glides out after you have them in place.
Hammer the Tack Glides (V) in the bottom of the Back Legs (H).
Attach the legs to the apron assembly with Flat Washers (ZC) and 3/8"x2½" Hex Bolts (ZD).
PAGE 6 — 276W
W
L
W
W
BB
BOTTOM VIEW
U
T
G
FIG. 8A
V
H
NN
ZC
ZG
ZH
ZH
FIG. 7B
ZD
FIG. 8C
Publicidad
