Stihl BR 500 Manual De Instrucciones página 14

: Fit the hose clamp (9) on the
pleated hose (7).
: Attach hook (1) of the discharge
wire to the eye (10).
9
7
11
12
: Push the pleated hose (7) with hose
clamp (9) over the elbow (11) in the
position shown.
: Tighten down the screw (12) firmly.
BR 500, BR 550, BR 600
: Push the nozzle (13) (curved or
straight, depending on market) onto
the blower tube (2) and engage it on
the lug (14).
Operate the machine only with a
properly fitted discharge wire
– The hook on the discharge wire
must be attached to the eye (arrow).
English / USA
– The sleeve on the discharge wire
must be clipped to the retainer
(arrow).
– The discharge wire must engage
the groove (arrow).
min. 1 cm
min. 1/2"
– The discharge wire must project at
least 1 cm.
BR 500
BR 550
BR 600
13