Information Before You Start; Starting / Stopping The Engine - Stihl BR 500 Manual De Instrucciones

English / USA
Information
Before You Start
1
2
Setting lever (1)
Throttle trigger (2)
0 = Engine stop
Ignition is interrupted, the engine
stops. Setting lever does not remain
in this position, it springs back.
# = Run position
Engine runs or can be started.
Throttle trigger can be operated
normally.
C= Lock position
The throttle trigger can be locked in
three positions: 1/3 throttle, 2/3
throttle and full throttle.
To disengage the lock, move the
setting lever back to the normal run
position #
22
Starting / Stopping
the Engine
Starting the Engine
Start the machine on a clean and
dust-free patch of ground to ensure
that no dust is sucked in.
: Move the setting lever (1) to #
: Press fuel pump bulb at least five
times – even if the bulb is filled with
fuel.
If engine is cold
: Turn the choke knob to l
If engine is warm
: Turn the choke knob to n
Also use this position if the engine
has been running but is still cold.
BR 500, BR 550, BR 600