dirna Bergstrom bycool green line INTEGRAL POWER Diagnosis De Averías página 13

INTEGRAL POWER
• Replace power cord 50A fuse checking and correcting the cause of the fault.
• Replace 15A (24V) 25A (12V) fuse of the electronic control power cord (for access remove the
access door located in the inner air distribution panel or the panel itself).
• Check connections or any breakage, correct or replace.
• Check switch position. "O" position trucks only (equipment operation with engine stopped).
• Check connections or any breakage on excitation cable, correct or replace.
• Correctly connect the connection cable between the control panel and the electronic control
(for access remove the access door located in the inner air distribution panel or the panel
itself).
• Charge or replace the battery.
• Check and correct any poor contacts.
• Reprogramme the remote control.
• Replace the remote control battery and reprogramme.
• Replace the electronic control.
• Replace the remote control.
• Check the cable or terminal contacts.
• Check terminal contacts or cables.
• Check terminal contacts or cables.
• Replace antifreeze sensor.
Solution
13
Air conditioning for vehicles
EN