Insignia NS-A1111 Guia Del Usuario página 10

NS-A1111_final_translationDTP.fm Page 10 Friday, February 17, 2006 12:09 PM
3 Press the stop button to stop playback.
Note
Before transporting the unit, remove any disc from
the disc compartment.
Locating tracks
Note
Searching and skipping can be done during playback
or pause, but can only be done for the CD currently
playing.
To skip to a track in sequence:
1 To go to the beginning of the current or the
preceding track, press the skip/search/preset
reverse button once.
2 To go to the beginning of the next track on the
CD, press the skip/search/preset forward
button once.
Reverse skip
To search for a point in a track:
1 Press and hold the skip/search/preset
reverse button to move backward at high
speed. Release the button at the desired
point.
2 Press and hold the skip/search/preset
forward button to move forward at high
speed. Release the button at the desired
point.
Reverse search
Repeating a track or disc
Repeat playback allows you to repeat the current
track, an entire disc, or all discs in the CD
changer.
You can use repeat playback during normal
playback (playback mode), stop mode, or pause
mode.
To repeat play during playback mode:
1 To repeat a track that is playing, press
Repeat on the remote control until the
display shows REPEAT and r1 (indicating a
track repeat). The currently playing track will
play repeatedly until you press the STOP
button.
Note
The skip/search buttons can be used during this
function and operate normally.
10
Forward skip
Forward search
Programming CD tracks
www.insignia-products.com
Insignia NS-A1111 5-CD Shelf System
2 To repeat the entire disc that is playing, press
Repeat on the remote control until the
display shows REPEAT and rd (indicating a
disc repeat). The currently playing disc will
play repeatedly from the current playing
point.
Note
The skip/search buttons can be used during this
function but operate in the search mode only.
3 To repeat all discs in the CD changer, press
Repeat on the remote control until the
display shows REPEAT and rA (indicating a
all-disc repeat). The discs will play repeatedly
from the current playing point.
4 Press the search/skip buttons to use select
another track on the selected disc, or use the
disc skip button to play the first track of the
newly selected disc.
5 To cancel repeat play, press Repeat on the
remote control until REPEAT disappears
from the display.
To repeat play during stop or pause modes:
1 While the CD player is stopped or paused,
program the repeat play function as if the CD
were in playback mode.
2 From stop mode, press the PLAY/PAUSE
button to begin repeat play. The currently
playing disc will play from the beginning of
the first track.
3 From pause mode, press the PLAY/PAUSE
button to begin repeat play. The currently
playing disc will play from the point at which
play was paused.
The system stores a total of 20 tracks from all
available discs in the disc tray. These tracks can
be played in a preset order.