Setting The Clock - Insignia NS-A1111 Guia Del Usuario

NS-A1111_final_translationDTP.fm Page 8 Friday, February 17, 2006 12:09 PM
Adjusting the sound
To adjust the sound:
1 Turn the volume control knob to obtain the
desired volume level.
2 For personal listening, connect headphones
to the shelf system.
Note
When the headphones are connected, the
speakers on the shelf system are automatically
disabled.

Setting the clock

To set the clock:
1 When the shelf system is on, press the ON/
OFF button on the shelf system to turn off the
shelf system and enter the standby mode.
The clock will show on the display without a
backlight.
2 Press the PLAY/PAUSE button until the hour
flashes on the display, then press the search/
skip button repeatedly to set the current hour.
/
3 Press the PLAY/PAUSE button until the
minute flashes on the display, then press the
search/skip button repeatedly to set the
current minute.
/
4 Press the PLAY/PAUSE button until 12H or
24H flashes on the display, then press the
search/skip button to select either a 12-hour
or 24-hour time format.
/
5 Press the PLAY/PAUSE button to confirm the
time setting.
/
Setting the timer alarm
To set the timer alarm:
1 When the shelf system is on, press the ON/
OFF button on the shelf system to turn off the
shelf system and enter the standby mode.
The clock will show on the display without a
backlight.
2 Press the TIMER button once.
8
Insignia NS-A1111 5-CD Shelf System
Note
Make sure that the time setting is correct before
setting the timer alarm.
3 Press the PLAY/PAUSE button until the hour
flashes on the display, then press the search/
skip button repeatedly to set the desired
hour.
4 Press the PLAY/PAUSE button until the
minute flashes on the display, then press the
search/skip button repeatedly to set the
desired minute.
5 Press the PLAY/PAUSE button to confirm the
time setting. An alarm sounds when the time
reaches the preset time.
6 Press the TIMER button a second time to
cancel the alarm after setting the timer alarm.
Tuning the radio
Manual tuning
To manually tune the radio:
1 Press the ON/OFF button on the shelf
system once to turn it on.
2 Press the FUNCTION button to tuner mode,
which is shown by the radio frequency
indicator on the display.
3 Press the BAND button to select the band
(AM or FM), which is shown by the band
indicator on the display, then tune a station.
Note
In FM mode, the stereo indicator lights when
reception is good.
Note
After changing the band or turning the radio off and
on again, the last station selected will be recalled.
F U N C T I O N F U N C T I O N F U N C T I O N F U N C T I O N
4 To search for a station quickly, hold the tuning
(up) or tuning (down) button on the remote
control. Station searching starts
automatically and stops automatically when a
station is found.
www.insignia-products.com
/
/
/