Water Filter; Fixing External Filter On The Wall (Optional) - Grundig GSBS14620FX Manual De Instrucciones

1.
Connect one end of the water
hose provided with the pump to
the product (see 3.6) and follow
the instructions below.
2.
Connect the other end of the
water hose to the water pump
by pushing the hose into the
pump's hose inlet.
3.
Place and fasten the pump
hose inside the carboy.
16
4.
Once the connection is
established, plug in and start
the water pump.
C
Please wait 2-3
minutes after starting
the pump to achieve
the desired efficiency.
C
See also the pump's
user guide for water
connection.
C
When using carboy,
water filter is not
required.

3.9 Water filter

(Optional)
The product may have internal or
external filter, depending on the
model. To attach the water filter,
follow the instructions below.
3.9.1.Fixing external filter
on the wall (Optional)
A
WARNING:
filter on the product.
Check to see the following parts
are supplied with your product's
model:
6
Do not fix the
5
4
3
1
2