Creating The Realistic Sound Fields; Dolby Surround; Dts Digital Surround; Dap Modes - JVC TH-V70 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Creating the realistic sound fields

You can use the following Surround modes to reproduce a realistic sound field.

7 Dolby Surround

• Dolby Pro Logic II
• Dolby Digital

7 DTS Digital Surround

7 DAP modes

7 All Channel Stereo
7 Dolby Surround
Dolby Pro Logic II*
Dolby Pro Logic II has newly developed multichannel
playback format to decode all 2 channel sources—stereo
source and Dolby Surround encoded source—into 5.1
channel.
Matrix-based encoding/decoding method for Dolby Pro Logic
II makes no limitation for the cutoff frequency of the rear
treble and enables stereo rear sound compared to
conventional Dolby Pro Logic.
Dolby Pro Logic II enables to reproduce spacious sound from
original sound without adding any new sounds and tonal
colorations.
Dolby Pro Logic II has two modes—Movie mode and Music
mode:
Pro Logic II Movie (PL II MOVIE)—suitable for reproduction
of Dolby Surround encoded sources bearing the mark
. You can enjoy soundfield very close to the one
DOLBY SURROUND
created with discrete 5.1 channel sounds.
Pro Logic II Music (PL II MUSIC)—suitable for reproduction
of any 2 channel stereo music sources. You can enjoy wide
and deep sound by using this mode.
• When Dolby Pro Logic II is activated, the
indicator lights up on the display window.
7 Digital signal format indicators on the display
window
DIGITAL
: Lights up when Dolby Digital signals
come in.
:
Lights up when DTS Digital (Surround)
signals come in.
No indication:
No digital signal indicator lights up when
Linear PCM signals or analog signals
come in.
NOTE: MPEG Multichannel
MPEG Multichannel signals are converted into Linear PCM
signals, then reproduced.
* Manufactured under license from Dolby Laboratories. "Dolby," "Pro
Logic," and the double-D symbol are trademarks of Dolby
Laboratories.
33
Dolby Digital*
Used to reproduce multichannel soundtracks of the software
encoded with Dolby Digital (
Dolby Digital 5.1 ch (DOLBY D) encoding method (so-called
discrete multichannel digital audio format) records and
digitally compresses the left front channel, right front channel,
center channel, left rear channel, right rear channel, and LFE
channel signals.
Since each channel is completely independent from the other
channel signals to avoid interference, you can obtain much
better sound quality with much stereo and surround effects.
NOTE:
Dolby Digital software can be roughly grouped into two categories—
multichannel (up to "5.1" channel) and 2 channel software. To enjoy
surround sounds while playing Dolby Digital 2 ch software, you can
use Dolby Pro Logic II.
7 DTS Digital Surround**
Used to reproduce multichannel soundtracks of the software
encoded with DTS Digital Surround (
DTS Digital Surround (DTS SURR) is another discrete
multichannel digital audio format available on CD, LD, and
DVD software.
Compared to Dolby Digital, audio compression ratio is
relatively low. This fact allows DTS Digital Surround format to
add breadth and depth to the reproduced sounds. As a
result, DTS Digital Surround features natural, solid and clear
sound.
PRO LOGIC II
Typical Multichannel (5.1 ch) reproduction
Left rear
speaker
** Manufactured under license from Digital Theater Systems, Inc. US
Pat. No. 5,451,942 and other world-wide patents issued and
pending. "DTS" and "DTS Digital Surround" are trademarks of
Digital Theater Systems, Inc. Copyright 1996 Digital Theater
Systems, Inc. All rights reserved.
).
).
Right front
Left front
speaker
speaker
D V D
D I G I T A L
T H E A T E R
S Y S T E M
T H - V 7 0
Center
speaker
Subwoofer
Right rear
speaker

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Xv-thv70Sp-pwv70Sp-xsv70Sp-xcv70

Tabla de contenido