Sauder Edge Water 419396 Guía De Ensamblaje página 18

Step 14
Insert a SLIDE CAM (10A) into each DRAWER SIDE (D83 and D84).
å
Fasten the DRAWER RIGHT (35GC) and DRAWER LEFT (35GD) to
å
the DRAWER SIDES (D83 and D84). Use four GOLD 5/16" FLAT
HEAD SCREWS (3S) through holes #1 and #3.
NOTE: The screw head in the CAM must be visible through the
å
slotted hole in the SLIDE.
Fasten two KNOBS (17K) to the DRAWER FRONT (K). Use two
å
BLACK 7/8" MACHINE SCREWS (37S).
2
3
17K
BLACK 7/8" MACHINE SCREW
(2 used for the KNOBS)
Page 18
Roller end
1
D84
K
37S
GOLD 5/16" FLAT HEAD SCREW
10A
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
D83
3S
(4 used in this step)
419396
10A
Roller end
1
2
3
www.sauder.com/services