Black 1-1/8" Machine Screw; Hinge - Sauder Edge Water 419396 Guía De Ensamblaje

Step 11
Carefully stand your unit upright.
å
Before fastening the DOOR to your unit, be sure the
å
mounting screw is against the stops as shown in the
diagram. If it isn't, loosen the mounting screw to slide it
against the stops. Then tighten the mounting screw.
Fasten a DOOR (G) to the LEFT END (B). Use the screws
å
in the HINGES. See the next step for adjustments.
Fasten a BACKPLATE (18K) and KNOB (17K) to the
å
DOOR (G). Use a BLACK 1-1/8" MACHINE SCREW (21S).
Repeat this step for the other DOOR (G).
å
18K
17K
(2 used for the KNOBS and BACKPLATES)
www.sauder.com/services
B
G
21S

BLACK 1-1/8" MACHINE SCREW

419396
Stop
Mounting
screw

Hinge

Page 15