Filling Instructions - Coltene BioSonic UC150 Guia Del Usuario

Power up Settings:
SET LANGUAGE / MEASURES
English
Español
Deutsch
Italiano
Français
Figure 2 Setup Screen: Language and Measures
12.02.2016 10:21
SET DATE / TIME
04 NOV 2013
05 DEC 2014
06 JAN 2015
07 FEB 2016
08 MAR 2017
00 vector graphics: logo and buttons
09 APR 2018
10 MAY 2019
01-logo-loading
DD.MM.YYYY MM.DD.YY YYYY.MM.DD
02-logo-information
Figure 3 Setup Screen: Date and Time
04-A-button-program-light
04-B-button-program-light-feedback
• SETUP COMPLETE. The display will now show the main screen once setup is completed in the
05-A-button-program-regular
05-B-button-program-regular-feedback
language of your choice. Your UC150 is now setup and ready to use!
06-A-button-program-heavy
06-B-button-program-heavy-feedback
07-A-button-program-my
NOTE: If modifications need to be made to the setup of the unit, go to settings menu by pressing
07-B-button-program-my-feedback
11-A-button-settings
to change the setup options.
11-B-button-settings-feedback
08-A-button-log
08-B-button-log-feedback

6. Filling Instructions

• Ensure that the drain handle
the unit with warm water to the fill line indicator
up to the minimum line and does not exceed maximum line while using accessories like
beakers or baskets.
• Pour the required amount of ultrasonic cleaning solution (eg. BioSonic General Purpose UC30,
BioSonic Enzymatic Ultrasonic Cleaner UC32) and water into the tank.
• Change the solution in the tank daily or sooner if it appears soiled or discolored. When beakers
are used, change the solution in the beaker after each use.
• Drain unit by fully rotating the drain handle clockwise to the "Open" position and allow solution
8
00 vector graphics: single-icons and screen buttons
°C °F
40°C
08 59
09 00
10 01
AM
11 02
12 03 PM
01 04
02 05
12Hr 24Hr
(Figure 5)
is fully rotated anti-clockwise to the close position. Fill
• SELECT A LANGUAGE AND TEMPERATURE
UNIT: Select the language for your appropriate
30-settings
region from the drop down list. Press
to accept.
31-temperature-large
32-temperature-medium
33-temperature-small
34-program-light
35-program-regular
36-program-heavy
37-program-my
00 vector graphics: single-icons and screen buttons
• SET THE DATE AND TIME: Set the date and
38-timer-medium
time with the preferred format by using the
39-timer-large
30-settings
drop down list and format buttons. Press
40-solution
accept. User can choose one of the three date
31-temperature-large
41-degas
formats:
32-temperature-medium
- DD.MM.YY
33-temperature-small
hot surface
03-product-name
- MM/DD/YY
34-program-light
- YY-MM-DD
09-1-A-button-heater- rst
35-program-regular
09-2-A-button-heater-after-code
09-B-button-heater-feedback
36-program-heavy
10-A-button-solution-degas
10-B-button-solution-degas-feedback
37-program-my
12-A-button-language-measurest
12-B-button-language-measures-feedback
38-timer-medium
13-A-button-date-time
39-timer-large
13-B-button-date-time-feedback
14-A-button-my-setup
40-solution
14-B-button-my-setup-feedback
41-degas
15-A-button-information
15-B-button-information-feedback
hot surface
16-A-button-degas
16-B-button-degas-feedback
CB
M 1:1
20.10.2016
(Figure 6). Ensure that the water level is filled
42-log
43-information
44-close-lid
45-lid-is-open
46-lid-was-open
47-repair
48-software-update
50-A-button-standby
50-B-button-standby-feedback
51-statusbar-standby-closed
52-statusbar-standby-opened
42-log
60-attention
43-information
61-instructions
62-A-button-ok
44-close-lid
62-B-button-ok-feedback
M 1:1
45-lid-is-open
25.10.2016
warning/caution
46-lid-was-open
47-repair
48-software-update
50-A-button-standby
50-B-button-standby-feedback
51-statusbar-standby-closed
52-statusbar-standby-opened
60-attention
61-instructions
62-A-button-ok
62-B-button-ok-feedback
M 1:1
25.10.2016
warning/caution
button 20-A-button-c
20-B-button-c
21-A-button-s
21-B-button-s
22-A-button-h
22-B-button-h
23-A-button-b
23-B-button-b
24-A-button-d
24-B-button-d
25-A-button-p
25-B-button-p
26-A-button-p
to 2
26-B-button-p
2
2
CB
2
2
2
2
2
2
2
2
2
2
2
CB