Degassing; Operation Instructions - Coltene BioSonic UC150 Guia Del Usuario

to empty into sink or waste system. Rinse tank and fully rotate the drain handle anti-clockwise
to the "Close" position. Never drain tank by manually discarding solution as this may cause the
unit to stop working properly.
NOTE: Never operate the unit without solution. Operating a dry tank will void the warranty. Do
not place objects directly on bottom of tank. Always use accessory baskets, cassette racks or
beakers.

7. Degassing

00 vector graphics: logo and buttons
Degassing the solution eliminates large air bubbles that interfere with the cleaning process and is
01-logo-loading
necessary each time new solution is added to the tank.
02-logo-information
• PRESS THE DEGAS icon on
04-A-button-program-light
04-B-button-program-light-feedback
05-A-button-program-regular
05-B-button-program-regular-feedback
• Select type of solution to log solution used or degas only and press
00 vector graphics: single-icons and screen buttons
06-A-button-program-heavy
06-B-button-program-heavy-feedback
• The UC150 will begin to cycle on and off during the degassing process. The timer will count
07-A-button-program-my
30-settings
07-B-button-program-my-feedback
down from five minutes.
11-A-button-settings
11-B-button-settings-feedback
31-temperature-large
08-A-button-log
32-temperature-medium
• DEGAS COMPLETE! Once the timer reaches zero, the words "Degas Complete" will be displayed.
08-B-button-log-feedback
33-temperature-small
Your solution is now ready for use. Press
34-program-light
35-program-regular

8. Operation Instructions

36-program-heavy
37-program-my
42-log Mode Selection
38-timer-medium
43-information
• Four modes are available to choose from on the main screen - 3 Preset modes: ECO: for light
39-timer-large
44-close-lid
loads; REGULAR: for medium loads; STRONG: for heavy loads and "MY" mode for customized
40-solution
(Figure 12)
45-lid-is-open operation.
41-degas
46-lid-was-open
hot surface
• 'MY' mode: For custom mode settings, select
47-repair
temperature and cleaning time. Ensure that HEATER function is ON if heating is desired. Press
48-software-update
to accept.
50-A-button-standby
50-B-button-standby-feedback
51-statusbar-standby-closed
• Select mode by pressing appropriate icon for your particular load. Press
52-statusbar-standby-opened
cycle. Press
60-attention
61-instructions
clean as the timer counts down the remaining minutes from the user-selected cleaning time.
62-A-button-ok
62-B-button-ok-feedback
warning/caution
feedback
00 vector graphics: single-icons and screen buttons
the main screen.
30-settings
31-temperature-large
32-temperature-medium
42-log
33-temperature-small
43-information
34-program-light
44-close-lid
35-program-regular
45-lid-is-open
36-program-heavy
46-lid-was-open
37-program-my
00 vector graphics: logo and buttons
47-repair
38-timer-medium
48-software-update
01-logo-loading
39-timer-large 00 vector graphics: single-icons and screen buttons
50-A-button-standby
50-B-button-standby-feedback
02-logo-information
40-solution
20-A-button-checked
51-statusbar-standby-closed
20-B-button-checked-feedback
30-settings
41-degas
52-statusbar-standby-opened
04-A-button-program-light
04-B-button-program-light-feedback
21-A-button-save
60-attention
31-temperature-large
hot surface
21-B-button-save-feedback
05-A-button-program-regular
61-instructions
05-B-button-program-regular-feedback
32-temperature-medium
22-A-button-home
62-A-button-ok
06-A-button-program-heavy
33-temperature-small
22-B-button-home-feedback
62-B-button-ok-feedback
06-B-button-program-heavy-feedback
34-program-light
23-A-button-back
warning/caution
07-A-button-program-my
23-B-button-back-feedback
07-B-button-program-my-feedback
35-program-regular
11-A-button-settings
11-B-button-settings-feedback
24-A-button-download
20-A-button-checked
24-B-button-download-feedback
36-program-heavy
20-B-button-checked-feedback 08-A-button-log
08-B-button-log-feedback
25-A-button-play
37-program-my
21-A-button-save
25-B-button-play-feedback
21-B-button-save-feedback
38-timer-medium
to pause. Ensure that lid is closed during operation. The UC150 will continue to 26-A-button-pause
22-A-button-home
39-timer-large
26-B-button-pause-feedback
22-B-button-home-feedback
40-solution
23-A-button-back
23-B-button-back-feedback
41-degas
24-A-button-download
hot surface
24-B-button-download-feedback
03-product-name
09-1-A-button-heater- rst
09-2-A-button-heater-after-code
09-B-button-heater-feedback
10-A-button-solution-degas
10-B-button-solution-degas-feedback
12-A-button-language-measurest
12-B-button-language-measures-feedback 42-log
13-A-button-date-time 43-information
13-B-button-date-time-feedback
44-close-lid
14-A-button-my-setup
14-B-button-my-setup-feedback
20-A-button-checked
45-lid-is-open
20-B-button-checked-feedback
15-A-button-information
15-B-button-information-feedback
46-lid-was-open
21-A-button-save
16-A-button-degas
21-B-button-save-feedback
16-B-button-degas-feedback
47-repair
CB
M 1:1
20.10.2016
to return to the main screen. 22-A-button-home
48-software-update
22-B-button-home-feedback
50-A-button-standby
50-B-button-standby-feedback 23-A-button-back
23-B-button-back-feedback
51-statusbar-standby-closed
52-statusbar-standby-opened
24-A-button-download
24-B-button-download-feedback
60-attention
61-instructions
25-A-button-play
25-B-button-play-feedback
62-A-button-ok
62-B-button-ok-feedback
26-A-button-pause
26-B-button-pause-feedback
warning/caution
from settings menu. Set the desired
CB
M 1:1
20.10.2016
to degas.
03-product-name
09-1-A-button-heater- rst
09-2-A-button-heater-after-code
09-B-button-heater-feedback
42-log
10-A-button-solution-degas
10-B-button-solution-degas-feedback
43-information
12-A-button-language-measurest
44-close-lid
12-B-button-language-measures-feedback
13-A-button-date-time
45-lid-is-open
13-B-button-date-time-feedback
CB
M 1:1
20.10.2016
46-lid-was-open
14-A-button-my-setup
14-B-button-my-setup-feedback
47-repair
15-A-button-information
15-B-button-information-feedback
48-software-update
16-A-button-degas
50-A-button-standby
16-B-button-degas-feedback
CB
50-B-button-standby-feedback
M 1:1
20.10.2016
51-statusbar-standby-closed
52-statusbar-standby-opened
60-attention
61-instructions
62-A-button-ok
62-B-button-ok-feedback
warning/caution
20-A-button-checked
20-B-button-checked-feedback
21-A-button-save
21-B-button-save-feedback
22-A-button-home
22-B-button-home-feedback
23-A-button-back
23-B-button-back-feedback
24-A-button-download
24-B-button-download-feedback
25-A-button-play
25-B-button-play-feedback
26-A-button-pause
26-B-button-pause-feedback
20-A-button-checked
20-B-button-checked-feedback
CB
M 1:1
20.10.2016
21-A-button-save
21-B-button-save-feedback
22-A-button-home
22-B-button-home-feedback
23-A-button-back
23-B-button-back-feedback
24-A-button-download
24-B-button-download-feedback
to start cleaning 25-A-button-play
25-B-button-play-feedback
26-A-button-pause
26-B-button-pause-feedback
9
20.10.2016
C
M 1:1