Battery Charger; Structure And Functions; Machine - Comet CRS 90 BT Manual De Instrucciones

nently affecting that element's performance.
• Refer to the battery manual to avoid physical da-
mage and economic loss.
- Gel module battery: this type of battery is mainte-
nance free and does not require special environments
for recharging (since it does not emit any harmful
gases); therefore, it is highly recommended.
• It should not be taken for granted that batteries
and battery chargers with the same technical featu-
res as those we offer will produce the same results.
Only perfect compatibility between these elements
(Pb-Acid batteries, gel batteries and battery chargers)
will safeguard the performances, the service life, the
safety and the economic value invested.

5.1.3 BATTERY CHARGER

This type of high-frequency battery charger efficien-
tly charges batteries, extending their operating and
service life. In addition, because they can be configu-
red with optional smart cards (magnetic badges), it is
a very versatile solution that reduces the number of
chargers required in the warehouse. The same battery
charger can be used for both Pb- Acid batteries and
for gel batteries.
The information indicated on the digital display can
be used to always keep the charging process, the bat-
tery and the battery charger under control (read the
specific manual for more details)..
•It should not be taken for granted that batteries and
battery chargers with the same technical features as
those we offer will produce the same results. Only per-
fect compatibility between these elements (Pb-Acid
batteries, gel batteries and battery chargers) will sa-
feguard the performances, the service life, the safety
and the economic value invested..

5.2 STRUCTURE AND FUNCTIONS

5.2.1 MACHINE

Photo A
1 Recovery tank
2 Operator's seat
3 Solution tank
4 Rear wheel
5 Bumper wheel (brush plate unit)
6 Splash guard
7 Front steering motorwheel
8 Front bumper wheels
9 Compartment for electric components
10 Steering wheel
Photo B
1 Recovery water drain hose support hook
2 Recovery water tank drain hose plug
3 Recovery water drain hose
4 Solution water tank filler plug
5 Solution water tank drain valve
6 Suction hose
7 Rear cover
8 Blinker
Photo C
Opening of the recovery water tank locking cap
1 Cap blocked
2 Cap unblocked
3 Cap opened
Photo D
1 Blinker
2 Suction hose seat
3 Floating switch
4 Rear cover
Photo E
1 Battery connector
2 Solution water dosing lever
3 Accelerator pedal
Photo F
1 Squeegee lifting/lowering thermal breaker
2 Hour meter
3 Battery charge indicator
4 Brush head unit lifting/lowering thermal breaker
5 Brush motor thermal breaker
6 Suction motor switch
7 Squeegee lifting/lowering selector
8 Operation emergency switch
9 Speed adjustment potentiometer
10 Key switch
11 Control panel protection fuse
12 Brush head unit lifting/lowering selector
13 Brush motor switch
14 Electric horn
15 Forward/reverse joystick selector
16Solotion tank low level warning light
Photo G
1 Squeegee bumper wheels (right/left)
2 Squeegee pression adjusting screw
3 Squeegee fast fixing knob
4 Squeegee inclination adjusting knob
5 Suction hose
6 Squeegee blades replacement knobs
7 Squeegee wheels (right/left)
Photo H
1 Solution water filter
Photo I
1 Suction motor
2 Battery box
Photo L
1 Chopper control board
2 Traction motor fuse (100A)
3 Suction motor fuse (40A)
4 Brush motor fuse (70A)
5 Diagnostic signaling LED
35