Lead Warning; Fuse Warning; Sel Button - Ideal 61-357 Manual De Operación Y Seguridad

Lead Warning

Lead Warning:
lead into any amperage input terminal, but
the rotary function switch IS NOT set to the
correct relative amperage position, the meter
will beep at 3Hz, LCD will display "LEAd"
and " .", flashes at 3Hz. If any amperage
function is selected first, but the test lead IS
NOT in the relative amperage input jack,the
meter will also beep at 3Hz and the LCD will
display "LEAd" and "

SEL Button

When inserting the test
.", flashes at 3Hz.
The SEL Button allows the user to toggle between multiple
functions when the function dial is used to select a specific
function. This can include but is not limited to toggling between
degrees F and C, AC and DC voltage or current, continuity,
resistance, capacitance and diode measurements.

Fuse Warning

Fuse Notification:
CANNOT be short circuited or used for
measuring while testing the fuse.
1. If the 600mA/1000V fuse is blown,
setting the rotary switch to the "mA"
or "uA" setting, the LCD will display
"FUSE" and "
will beep continuously at the same time.
2. If the 11A/1000V fuse is blown,
setting the rotary switch to the "A"
setting, the LCD will display "FUSE"
and " .", and the buzzer will beep
continuously at the same time.
The test leads
.", and the buzzer
14